Controls Engineer Intern

San Leandro, CA
Internship
Entry Level

Coreshell's metallurgical Silicon anode technology delivers high capacity, fast-charging, and superior safety. Our low-cost liquid-phase nano-coating addresses critical electrode-surface degradation issues and enables batteries with a Silicon-dominant anode that have higher energy density, superior intrinsic thermal safety, and significantly lower cost/kWh compared to current LIBs. Our Si anode material is lower than the cost of graphite and 100% domestically sourced. We strive to transform the global automotive market by enabling low-cost and long-range EVs as a first step towards net-zero sustainability in the near future.

Position Summary

The Controls Intern will work with the engineering team to design and implement process controls systems for a pilot-scale chemical synthesis process. This project will focus on providing automated controls of process parameters such as temperature, pressure and flow for various unit operations. It will require working closely with engineers and technicians to understand the current pilot-scale process, collect data and build a control system. This is a hands-on project based in a laboratory environment and will require both working with process sensing hardware as well as controls software.
 

Core Responsibilities

  • Select, install, calibrate and inspect instrumentation, sensors and cameras to collect process data such as pressure, temperature, and flow from equipment such as batch reactors, piping, heaters, chillers, pumps, etc.
  • Assist in the designing of the control systems to use process data from sensors and cameras to control process variables.
  • Develop, prototype, and wire the electronic control systems.
  • Program and calibrate PID controllers based on sensor feedback.
  • Support troubleshooting of temperature, pressure, flow, and mixing control systems.
  • Create and update control system documentation.
  • Follow all safety procedures, PPE requirements, and operating standards.

Required Experience & Qualifications

  • Currently pursuing an Electrical Engineering, Computer Science, Chemical Engineering, Mechanical Engineering or other related major
  • Programming experience required, ML/AI experience preferred
  • Simulink experience preferred
  • Experience with Arduino, PLC/DCS/SCADA/HMI systems preferred
  • Ability to work independently in a team environment 
  • Strong problem solving skills and attention to detail

Location & Benefits

  • Location: On-site, San Leandro, CA
  • Compensation: $25-30/hour, depending on experience 
  • Applications are reviewed on a rolling basis.
 

Coreshell Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, ancestry, age, disability, genetic information, military or veteran status, marital status, or any other protected status under California law.  

 

Applicants requiring reasonable accommodation during the application or interview process should notify the recruiting team.

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*